This 3 in 1 part tests bridging, overhangs and stringing using significantly less plastic than most tests available. Perfect for dialing in retraction, speed and temperature settings!
Bridging range is from 20 to 80mm steps and overhangs are from 20deg to 70deg.
This can be printed in under an hour and uses less than 8g of filament.
edit 23/02/20:
Model updated to reduce filament use slightly while tidying up the bridge ends.
edit 03/03/20:
Model updated so it is the right way up without having to reposition.
| bridge_overhang_string_test.STL | 1.1MB |
