This is a set of brick walls for 28 mm wargaming terrain in 1/56 scale. Each wall segment sits on a 25 mm wide base and the spacing between columns is 150 mm (about 6x1"). The included segments are:
The slabs that go on top of the wall are separate pieces. Not only does this make supports unnecessary while printing, it also gives some options. I included flat and angled top pieces for all wall segments. There is also a top cover with a sphere, which looks nice on the end sections of the wall. Each wall segment has little tabs on top to help align the cover pieces.
| brick_wall_135_corner.STL | 1.1MB | |
| brick_wall_90_corner.STL | 1.3MB | |
| brick_wall_half_section.STL | 846.7KB | |
| brick_wall_ruined_section.STL | 902.9KB | |
| brick_wall_straight_section.STL | 965.8KB | |
| cover_angled.STL | 10.6KB | |
| cover_angled_for_135_corner.STL | 11.0KB | |
| cover_angled_ruined.STL | 3.9KB | |
| cover_flat.STL | 9.7KB | |
| cover_flat_for_135_corner.STL | 10.2KB | |
| cover_flat_ruined.STL | 3.6KB | |
| cover_square_angled.STL | 4.1KB | |
| cover_square_flat.STL | 3.6KB | |
| cover_square_sphere.STL | 1.4MB | |
| parasolid_files.zip | 2.8MB |
