Brick Dice Tower With Fold-Up Wooden Drawbridges 3D Printer Model
The file 'Brick Dice Tower With Fold-Up Wooden Drawbridges 3D Printer Model' is (stl) file type, size is 8.2MB.
The file 'Brick Dice Tower With Fold-Up Wooden Drawbridges 3D Printer Model' is (stl) file type, size is 8.2MB.
The newest version of the dice tower! This dice tower has extra detail added with brick throughout the tower and wooden grain added on the fold-up drawbridges.
Remixed from garyacrowellsr's 'Remixed Angular Dice Tower, with trays'
This one is a real challenge to print, so make one and test out your printer today!
Check out our Etsy for all of our 3D printed awesomeness!
https://www.etsy.com/shop/3DCentral
You'll want to print these at a fairly high resolution (at least .2mm) because of the steep angle and all the detail, otherwise it could be droopy.
Print the following pieces:
1x tower.stl
2x tray.stl
4x pin_1.stl
Snap the pins into the holes on the tray, facing inwards, and then snap the tray to the tower. Repeat on the opposite side, and you're ready to play!
EDIT: It looks like some people are having trouble with the pins. I print the pins in ABS and they work well, but it's quite possible the pins don't print well in PLA.
| dice_tower.stl | 9.5MB | |
| drawbridge.stl | 9.8MB | |
| pin_1.stl | 21.1KB |
