Breating Plant Pot With Air Holes (air Pot) 3D Printer Model
The file 'Breating Plant Pot With Air Holes (air Pot) 3D Printer Model' is (scad,stl) file type, size is 17.6MB.
The file 'Breating Plant Pot With Air Holes (air Pot) 3D Printer Model' is (scad,stl) file type, size is 17.6MB.
I needed some plant pot which has air holes and I had printed silica gel containers right before. So many thanks to this project: https://www.printables.com/model/476778-silica-gel-container
I got what I needed but there is still one layer left above the bottom holes, not sure if the layer still exists. I changed the bottom holes to be small and think I fixed it but i got the two pots I needed and did not print it again so please check before you print.
Since Vase mode is not an option to have the project be strong enough - it acutally is but I don't suggest it for bigger pots - I adapted it to my needs.
The attached open scad file can be changed to one's need and sizes etc. hope this helps at least one person here :)
cheers,
tom
| silica-gel-container-to-flower-pod.scad | 3.2KB | |
| silica-gel-container-to-flower-pod.stl | 15.3MB | |
| silica-gel-container-to-flower-pod10.stl | 5.9MB | |
| silica-gel-container-to-flower-pod5.stl | 5.4MB | |
| silica-gel-container-to-flower-pod6.stl | 4.5MB | |
| silica-gel-container-to-flower-pod7.stl | 4.9MB | |
| silica-gel-container-to-flower-pod8.stl | 5.1MB | |
| silica-gel-container-to-flower-pod9.stl | 5.8MB |
