This is a breakout board for an ATtiny84 IC. Its real purpose is to test and demonstrate Cu-29 conductive filament from Kupros Inc. This is a work in progress but you may configure it for your application. It will eventually be updated to be more complete, however it should have some utility as it sits.
Some DIY is required. You will have to place the traces in the correct positions on top of the board. Set all the traces 1.5mm above the build plate and just move them where needed. Scale the straight traces to 0.2mm tall and 1mm wide to match the curved traces in size. We do not recommend PLA as a substrate material for any printed electrical applications.
As of 9-24-24 an Attiny has not actually been added, this has been used more for experimentation purposes in developing the material, but we would love to see what you come up with! Please publish your makes and leave comments!
| Cu29_settings__9-17-24_cura.ods | 23.4KB | |
| IC_base.stl | 17.8KB | |
| IC_base_curve_trace_large.stl | 3.2KB | |
| IC_base_curve_trace_small.stl | 3.2KB | |
| trace.stl | 684.0B |
