Brake Pedal Pusher 3D Printer Model
The file 'Brake Pedal Pusher 3D Printer Model' is (stl) file type, size is 2.8MB.
The file 'Brake Pedal Pusher 3D Printer Model' is (stl) file type, size is 2.8MB.
Every tried seeing if your brake lights are working, or need to check the voltage on your own? How many times have you tried to find that perfect piece of wood for the job?
This simple thing does that for you.
Assemble the parts (see below), sit in the drivers seat, put your foot on the brake and put the thing in place with the top half cupping the steering wheel. Unscrew the top until it holds. Job done!
A tip: Hold the base part with your foot to stop it rotating when you adjust the top.
Disclaimer in this ridiculous PC/blame culture world we now live in: Do NOT use this thing for any other purpose for which it was designed - particularly as it looks like a small axle stand. #dead
(Addendum 12/4/18: I will design and upload some exender tubes so that you can use the thing with other vehicles that have different brake-to-steering lengths. Anyone got any suggestions for the lengths? 20mm/30mm?).
| Brake_Foot.stl | 3.9MB | |
| Brake_Top_Lower.stl | 10.1MB | |
| Brake_Top_Upper.stl | 9.4MB |
