Bracket + Z-EndStop + Oil Drip Tray + Oldham Coupler For TEVO Tarantula 3D Printer Model
The file 'Bracket + Z-EndStop + Oil Drip Tray + Oldham Coupler For TEVO Tarantula 3D Printer Model' is (STL,stl) file type, size is 4.6MB.
The file 'Bracket + Z-EndStop + Oil Drip Tray + Oldham Coupler For TEVO Tarantula 3D Printer Model' is (STL,stl) file type, size is 4.6MB.
REMARK: I've already made an easier and better versions of this, which maybe will be better for you. Please check it before you print this: https://www.thingiverse.com/thing:2975772
This is a modular mix of following things:
1) my 'Z-endstop' (http://www.thingiverse.com/thing:1443439)
2) my 'Oil Drip Tray' (http://www.thingiverse.com/thing:1525464) You need to put a PET-cap into the hole.
3) the 'Tevo Tarantula Brackets' by thingirob (http://www.thingiverse.com/thing:1457449/#files)
4) The 'Tarantula Oldham Coupler V4b1' by Doron Shalev (under Tarantula facebook page 'files' section).
Now you can use the 4 models at once, or a combination of them!
(Off course all credits go to 'Rob Cad' for designing the Brackets and & 'Doron Shalev' for the Oldham Coupler (V4b1)!)
You can print the Bracket with or without the 'Oil Drip Tray', and with or without the Z-Endstop Button Holder (all different models available). Also you can print a totally separate Z-Endstop Button Holder, for those who don't need/want to use the Bracket. Make sure you use/print the motor bracket you find here, and not Rob Cad's version, otherwise your Z-rod won't be aligned with the Oldham Coupler and Oil Drip!
You can use the screws and nuts delivered with the printer. Parts you need 'extra':
1x PET-cap (To put into the Oil Drip Hole)
1x M5 nut (for the lower hole of the Z-Endstop)
1x M5 nylon nut (for the upper hole of the Z-Endstop)
1x M5 50mm bolt (with hexagon head)
Have fun! And please add pictures when you made one!
| Bracket_clean_made_by_thingirob.STL | 1.2MB | |
| Bracket_for_Z-motor.stl | 4.4MB | |
| Bracket_with_Oil_Drip_Tray.stl | 1.8MB | |
| Bracket_with_Z-Endstop.stl | 1.2MB | |
| Bracket_with_Z-Endstop_And_Oil_Drip_Tray.stl | 1.8MB | |
| Oldham_Coupler_Lower_Part.stl | 146.4KB | |
| Oldham_Coupler_Middle_Part.stl | 85.4KB | |
| Oldham_Coupler_with_Z-Endstop.stl | 452.7KB | |
| Z-Endstop_Button_Holder_to_use_separate.stl | 92.8KB | |
| Z-Endstop_Button_Holder_to_use_with_Bracket.stl | 89.3KB | |
| Z-Endstop_Thumb_Screw.stl | 300.7KB | |
| Z-Endstop_Thumb_Screw_Cover.stl | 259.5KB |
![Tube Corner Joint (3 Way) [25mm] 3D Printer Model](https://res.3axis.co/025ac40f-0c58-48f3-83c0-64db51747566/images/da5f532f-528c-4997-b700-9bb6f5d738c5_thumb.jpg)
