I would be very happy about a Tip.

Bracket for small fire extinguisher in camper van

Introduction

Stable mounting for a quick-grab small fire extinguisher (maximum diameter 110 mm) in the motorhome or caravan. A lying position is provided.
The bracket is three-part to be as flexible as possible and adapt to the conditions in the motorhome. The fire extinguisher is attached with a separate strap (maximum width of the strap 44 mm).
The bracket is very stable and has proven itself even on bumpy gravel roads.

2 kg car fire extinguisher
https://www.amazon.de/Brandengel-Autofeuerl%C3%B6scher-Pulverl%C3%B6scher-Feuerl%C3%B6scher-Pr%C3%BCfnachweis/dp/B0913FT686?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=feuerl%C3%B6scher+g%C3%B6ckler+auto&qid=1632297124&qsid=259-7232698-9764829&sr=8-11&sres=B07SX8NRC2,B005FFW684,B07NQ2LQXN,B004N71TQU,B07QLJDHYP,B00S52Z0SC,B0913FT686,B0949G9V6S,B012T19YTU,B078GRJJZD,B073X2V2RZ,B07PHMTPWD,B005GU1ZLM,B00HRSW1B4,B07QCTKGY8,B002UTM462,B07FLW88XR,B07FN4NYR9,B075RYZWRB,B08H8B8W99&linkCode=sl1&tag=sciencefeles-21&linkId=e6cbeddf6220aaada0d2a401de12df89&language=de_DE&ref_=as_li_ss_tl

*This is an Amazon afiliate link. I would be very happy if you use it to support my work indirectly.

Printing

I recommend using heat-stable filament such as PETG, ASA or ABS, as PLA loses its shape in the summer months in a warm car. A layer height of 0.2 mm with a filling of 20 % for the two supports and 50 % for the belt holder have proven to be very stable.

Assembly

Six 4 mm pan head or flat head screws are required. Indentations are provided for the screw heads. Furthermore, a strap with an easy and quick to use buckle with a maximum width of 44 mm.

I have also constructed a vertical holder for this type of fire extinguisher in which the fire extinguisher stands upright: https://www.thingiverse.com/thing:6489711

Check out my other designs for expedition vehicles and camper vans.

Visit my website for more information: www.science-feles.de.

---

Ceterum censeo martem esse abeundum.