Brace Brackets For Alesis Nitro Frame – ISO Metric M5 Screws Version 3D Printer Model
The file 'Brace Brackets For Alesis Nitro Frame – ISO Metric M5 Screws Version 3D Printer Model' is (stl) file type, size is 30.6KB.
The file 'Brace Brackets For Alesis Nitro Frame – ISO Metric M5 Screws Version 3D Printer Model' is (stl) file type, size is 30.6KB.
This is a remix of [https://www.thingiverse.com/thing:6418186].(https://www.thingiverse.com/thing:6418186)
I'm grateful to ock10 for his project, however I needed to modify it to match the ISO metric standards and for use with the hex wrench provided by Alesis in the Nitro kit (diameter 4mm).
The screws used are 1 M5x40 and 1 M5x20 for each bracket, 2 washers (diameter 11mm) for a better distribution of the pressure on the bracket's surface under the screw's heads. The nuts and the washers fit in with a little finger pressure (or by tightening up the screws) since the holes are only 0.1mm wider than them.
NOTE: I've just updated the 35mm brace bracket so now a woodstick 20mm wide fits perfectly.
| Brace_Bracket_4_Alesis_Nitro_-_35mm_-_Metric_M5_Screw.stl | 68.1KB | |
| Brace_Bracket_4_Alesis_Nitro_-__28mm_-_Metric_M5_Screw.stl | 62.8KB |
