Your kid is ready for his/her first iPhone, and you don't have the box from your old phone anymore...

This Thing resembles the packaging of the Apple iPhone. There are two sets of files.

• Set 1: will fit the iPhone 6, iPhone 7 and iPhone 8.
  Device dimensions: height: 5.44” | 138.3 mm width: 2.64” | 67.1 mm
  
• Set 2: will fit the iPhone 11, iPhone 12, iPhone 13 and iPhone 14. Also the Pro models of each, but not the Max versions
  Device dimensions: height: 5.78” | 146.7 mm width: 2.82” | 71.5 mm

The Apple logo file and the TTF font are generic for both sets.

Print instructions

• Print the box as-is
• Print the lid upside down with no support. The Apple logo will come out fine.
• The Apple logo can be printed separately in a different color and then be glued into place. Best is to measure the actual depth of the Apple logo after you print the lid and adjust (scale in your slicer) the logo to the following dimensions: L 99% W 99% H ??% where the height is 80% when you measure 0.80 mm of actual depth. You might need to play with these dimensions a bit for a snug fit.

If you want, you can add text to the lid (like in the picture). I have added the Apple San Francisco TTF font file for that.

Enjoy!