Boxes with hinged lid and latch. Prints in place. Moderate 0.3mm clearance and no bridging makes this a pretty easy print. The last dimension is the hinge diameter (wall thickness is diam/2).
Shown printed at 0.15mm layer height with tough PLA on a Prusa Mini
25x25x4mm - about 1:00 (pictured)
25x35x4mm - about 1:20
40x40x5mm - about 3:10
40x60x5mm - about 3:45 (pictured)
60x90x5mm - about 8:00 (pictured)
90x120x5mm - about 16:00
https://www.youtube.com/shorts/cisYzztu6CM
Printing suggestions:
-Print with the long edge in the direction of bed movement to reduce the chance of the tall, skinny lid coming free or moving.
-Avoid drafts that might cause layer shifts or try a draft shield in the slicer
-If the hinges are weak try the bigger boxes with 5mm hinge diameter
| BoxHingedPip_25x25x4mm.stl | 1.0MB | |
| BoxHingedPip_25x35x4mm.stl | 1.0MB | |
| BoxHingedPip_40x40x5mm.stl | 1.2MB | |
| BoxHingedPip_40x60x5mm.stl | 1.5MB | |
| BoxHingedPip_60x90x5mm.stl | 2.0MB | |
| BoxHingedPip_90x120x5mm.stl | 2.4MB |
