Box With Divided Compartments 3D Printer Model
The file 'Box With Divided Compartments 3D Printer Model' is (stl) file type, size is 10.8KB.
The file 'Box With Divided Compartments 3D Printer Model' is (stl) file type, size is 10.8KB.
This is a box that I designed as I wanted something that gave had a lot of individual compartments in it of varying sizes. Is now used by my better half as a jewellery box.
I printed this box using Black PLA filament from http://www.3dexfilament.co.uk and used a layer height of 0.2mm and an infill of 15% but infill is not much of a problem so you could go to 10%. The lid is a fraction narrower than the box so that it easily slides in and out (I found with most other boxes on here that the lid was too tight fitting). I used a nozzle temperature of 200 degrees and a bed temperature of 70 degrees. Does not need any supports.
Please let me know how you get on with printing this. All feedback is welcome!
| Divided_Box.stl | 188.3KB |
