Box Support For Elegoo Neptune 4 3D Printer Model Free Download

Description Files (31)

Summary

Sometimes I'm printing in ABS on my Elegoo Neptune 4 and doing this in an enclosure helps a lot.

I started to use a cardboard box at the very beginning and thought about buying a 3D printer enclosure, but later decided not to go this way for the following reasons:

Small enclosures are not high enough to fit the printer with spool on top and big enclosures are really too big for my workbench;
It is harder to do maintenance when printer is inside enclosure;
Whole printer is inside the enclosure and this is not good for the printer's board and integrated power supply;
In my situation printer sitting on workbench in garage and just putting a box on top leaves too many gaps at the bottom.

Long story short, I decided to create a support that can be assembled around printer (without moving it at all) that will support the box for situations when I need to print in ABS.

I monitored temperatures while printing ABS. Temperature insde reached 46 C (ambient temperature was 25 C). MCU and Host chip temperatures were as while printing without any box.

STEP files included.

Orca Slicer project with all settings I used included.

Planks will require 30-50 g filament each. Leg will require ~7g.
You will need 1 or 2 legs for every connection.

Back-Left_v179.step	276.2KB
Back-Left_v179.stl	126.5KB
Back-Middle_v179.step	223.7KB
Back-Middle_v179.stl	66.6KB
Back-Right_v179.step	181.5KB
Back-Right_v179.stl	59.3KB
Front-Left_v179.step	180.4KB
Front-Left_v179.stl	58.7KB
Front-Middle_v179.step	167.7KB
Front-Middle_v179.stl	58.3KB
Front-Right_v179.step	175.8KB
Front-Right_v179.stl	58.4KB
Left-Back_v179.step	175.5KB
Left-Back_v179.stl	58.1KB
Left-Front_v179.step	179.1KB
Left-Front_v179.stl	58.5KB
Left-Middle_v179.step	159.4KB
Left-Middle_v179.stl	56.9KB
Leg_pin_v179.step	13.6KB
Leg_pin_v179.stl	5.4KB
Leg_v179.step	86.1KB
Leg_v179.stl	131.6KB
OrcaSlicer_Project.3mf	2.6MB
Right-Back_v179.step	178.6KB
Right-Back_v179.stl	58.5KB
Right-Front_v179.step	204.3KB
Right-Front_v179.stl	62.3KB
Right-Middle_v179.step	172.3KB
Right-Middle_v179.stl	61.7KB
Screen_hole_cover_v179.step	32.5KB
Screen_hole_cover_v179.stl	4.0KB

Box Support For Elegoo Neptune 4 3D Printer Model

Summary

Tags

You might also like