I have designed a set of removable assortment box for the Parkside Interlock-Organizer. Every box is equipped with a handle, therefore it is easy to grab them and pick-up what you need. The top of the handle can be used for labeling the boxes. Every box is printable without support with PLA. I have not used support for the Nr. 3) and I have printed them in a good quality. Although, if your part cooling fan is not efficient enough you might need support for this box.
Box sizes (Width x Depth x Height; wall thickness; corner rounding radius, each value in mm):
1) 80x77x55; 1.6; 15
2) 60x73x55; 1.6; 8
3) 73x58x55; 1.6; 10 (please note that that you have to mirror this box to fit to the right side of the organizer)
4) 21x61x55; 1.2; 1
5) 44x72x55; 1.2; 8
6) 82x62x55; 1.6; 2
To fill up one organizer you have to print 2 set from the above boxes (organizer layout can be seen in the first picture). The Nr. 3) box has to be mirrored if you plan to use it in the right side of the organizer!
Suggestion: Cut out a 2-3mm thick sponge-rubber and glue it to the Organizer lid. This prevents to mix the content of the different boxes, even if they are filled with tiny parts.
| 1_80x77x55_r15_f1.6_m30.stl | 89.0KB | |
| 2_60x73x55_r8_f1.6_m24.stl | 78.4KB | |
| 3_73x58x55_r10_f1.6_m30.stl | 110.4KB | |
| 4_21x61x55_r1_f1.2_m20.stl | 28.9KB | |
| 5_44x72x55_r8_f1.2_m24.stl | 80.5KB | |
| 6_82x62x55_r2_f1.6_m30.stl | 35.7KB |
