The dimensions of this box mod are: 56x25x88 mm.
A suggestion: print it with ABS because PLA do not resist for this kind of usage.
To mount the box mod u need:
For the wiring i used the scheme that u can see in the shots.
This box mod is for two 18650 in serie (not parallel).
Under the mosfet i placed a little piece of cork to avoid direct contact with the plastic.
U can choose with:
Remember, for YOUR SAFETY, to put off the box mod when u don'use it.
Good luck.
The box mod in the shot is printed with a Zortrax M200 at 140 microns.
| body_dripcap_hole_10_mm.stl | 900.5KB | |
| body_dripcap_hole_12_mm.stl | 904.2KB | |
| body_no_hole.stl | 739.0KB | |
| door_without_onoff_window.stl | 232.9KB | |
| door_with_onoff_window.stl | 256.7KB | |
| internal_cover.stl | 67.9KB | |
| onoff_support.stl | 9.7KB |
