This is a "different" front style of this one: http://www.thingiverse.com/thing:1753115
External size are 82x44x24.
Simple to print and to mount.
U need:
some battery contact, i used keystone 5209 > http://fave.co/2bsgxvX
brass or copper or silver strip, i used KS 0,81x12,6 > http://fave.co/2cf8csE
a drip cap (there are two version of body with hole of 10 or 12 mm);
12x magnets 3x1 > http://fave.co/2czxo0r
6 or 8.5 rount (18 mm) bottle with tube.
Good Luck !
Update 09/09/2016
Update 14/09/2016
added fatdaddy_positive_pin_blocker.stl: u need this if u want use the Fat Daddy bottom feeder cap v5.
| body_hole_10_mm.stl | 1.0MB | |
| body_hole_12_mm.stl | 1.1MB | |
| bottle_spacer.stl | 77.4KB | |
| fat_daddy_pin_locker.stl | 106.9KB | |
| front_panel.stl | 335.0KB | |
| push_button_A.stl | 274.9KB | |
| push_button_B.stl | 552.3KB | |
| push_button_B_v2.stl | 592.8KB |
