Box MKS Base 1.4 + Mosfet + Relay + TFT28 + WiFi + Smoothers 3D Printer Model
The file 'Box MKS Base 1.4 + Mosfet + Relay + TFT28 + WiFi + Smoothers 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Box MKS Base 1.4 + Mosfet + Relay + TFT28 + WiFi + Smoothers 3D Printer Model' is (stl) file type, size is 1.0MB.
Caution!! I created the TFT 32 version on demand, but I never printed or tested it because I do not have this screen. The SD and USB openings may not be accurate, please, if someone accepts the risk of printing it let me know in the comments the result, if it's not ok I prefer to delete the file, thanks for the help.
As the title say, this is a box to bring all the electronic parts of the printer together in one place.
in the upper cover is a 60 x 60 x 15 mm fan and the MKS HLKWiFi module.
in the front panel mounts a MKS TFT28 and there is still space left free to drill and install some switch (leds or other) in the future
in the base it mounts a MKS Base 1.4, a mosfet and a relay. There is also room for 3 smoothers but maybe these make no difference to the drivers mounted in my MKS Base.
The Relay is used to turn on the LEDs mounted on my printer( https://www.thingiverse.com/thing:2925918 ) , I think I will use some free pins (those of servos) to control it, perhaps using the TFT ( https://www.youtube.com/watch?v=A3ngUwd2YKE ) or touch sensors mounted on the left of the screen, I still have to decide
I used 3 mm screws of those used usually in PC case with nuts for almost everything, for the relay instead I used smaller screws that are seen in photos.
I cut and shortened the flat cable that connects the screen to the base to avoid encumbrance, it is not a necessary thing but I liked more order.
For the back I printed with 8 outlines (perimeter) and 0 solid layers higher and lower as to create a grill (see photo)
Update 29/5/2018
I added another file "Base" with a room for a second Mosfet to be mounted in a mirror, means the type of mosfet I use, other models may not be there.
I added another "cover" file with an accommodation for the MKS PWC module.
I do not have these pieces, I've never printed them, I've taken measurements from the internet, I hope they're fine.
| Base.stl | 755.4KB | |
| Base_2_Mosfet.stl | 852.9KB | |
| Front_TFT_28.stl | 308.1KB | |
| Front_TFT_32.stl | 118.8KB | |
| Retro.stl | 4.2KB | |
| superiore.stl | 1.1MB | |
| superiore__+_MKS_PWC.stl | 1.4MB |
