Box Lock 3D Printer Model
The file 'Box Lock 3D Printer Model' is (stl) file type, size is 419.1KB.
The file 'Box Lock 3D Printer Model' is (stl) file type, size is 419.1KB.
Okay so first off, although I have called this a lock it is not a lock, but more a latch.
I origin ally designed it for a treasure chest project I made a few years ago. The chest was made from cardboard and so the lock was made specifically for cardboard.
When I decided to upload it, I wanted it to be more versatile, so redesigned it to fit anything. More like a traditional lock.
The current design requires a couple of springs, I used ones I got from amazon. Unfortunately, these are no longer available, but I have put the link her for reference on the size.
https://www.amazon.co.uk/gp/product/B01EOIEM7U/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I will eventually try printing some springs and rivets if you wanted to attach it to cardboard as I did, some check back in a week or so for any updates.
| Body.stl | 142.4KB | |
| Key.stl | 129.7KB | |
| key_hole_cover.stl | 778.9KB | |
| Latch.stl | 29.9KB | |
| Lever.stl | 47.6KB | |
| Long_Key.stl | 157.4KB | |
| Push_PinA.stl | 40.0KB | |
| Push_PinAB.stl | 36.6KB | |
| Push_PinB.stl | 172.0KB | |
| top.stl | 53.2KB | |
| X_2_Lever_pin.stl | 37.0KB |
