Box For Shims (Remix) 3D Printer Model
The file 'Box For Shims (Remix) 3D Printer Model' is (stl) file type, size is 24.9KB.
The file 'Box For Shims (Remix) 3D Printer Model' is (stl) file type, size is 24.9KB.
I needed a box for my Stackable Shims, and woutwoot's Simple Fully Customizable Box was a great match for these rounded-corner shims.
The Customizer options were straightforward and easy to use. It rendered a predictable and accurate STL file. The STL file needed no slicer repairs.
The box and lid printed well. The lid had a tight fit using the default tolerance (0.4mm), but it easily could have been slightly resized (tighter or looser) in the slicer or adjusted with the "tolerance" variable in the Customizer.
I created two boxes with lids. One is 130mm tall, which can fit the entire set of tah3d's shims (127mm). The other is 80mm tall, which fits the three shim sets I printed. If you need a different height, you probably can cut the taller box in your slicer, or you could use the customizable file. I included an image of the settings I used for these boxes.
| My_Shim_Box_-_130mm.stl | 65.3KB | |
| My_Shim_Box_-_80mm.stl | 65.3KB |
