This is a simple box for housing an ESP32 devkit v1 and DHT22 (temperature/humidity), BH1750 (lux) and LD2410 (presence) sensors.
The box is oversized to keep the DHT22 the heat generated by the ESP32 and the LD2410 away from the DHT22.
You will need 3 M3 heat-set inserts and 3 M3 screws for the DHT22 and the BH1750, or you can simply hot glue them in place.
The LD2410 is a press fit or you can use a drop of hot glue.
The lid is a press fit.
| Esp32_sensors_box.stl | 1.2MB | |
| Esp32_sensors_lid.stl | 131.3KB |
