AIR is a Bowden mount for the E3D v6 with a 40mm cold-end cooling fan, 50mm 5015 layer fan and BLTouch bed levelling sensor.
I have included a suitable X-Carriage for the Prusa i3 but feel free to design your own. The mounting hole spacing is 24mm (H) by 23mm (V) center-to-center.
Important: If you print the layer fan duct in the same material you regularly print with then you MUST enable the layer fan when the hot-end is active to prevent warping of the duct.
What you need
1x E3D v6
1x 5015 Radial (Blower) Fan
1x 40mm Axiel Fan
1x BLTouch
4x M3x55mm
8x M3x25mm
1x M3x20mm
4x LM8UU (for Prusa i3 x-carriage)
I recommend the Noctua NF A4x10 FLX as the cooling fan.
BLTouch position (from nozzle): X = +36mm Y = 0mm. Z = +2mm - Z will not be perfect.
| blower-fan-cover.STL | 365.3KB | |
| blower-fan-duct.STL | 90.7KB | |
| bltouch-mount.STL | 71.0KB | |
| left-block.STL | 122.4KB | |
| mount-clip.STL | 25.1KB | |
| right-block.STL | 109.3KB | |
| x-carriage.STL | 141.7KB |
