In both models bow collimator I had ever seen, they wore or velcro strap or a piece attached to the fingerboard with screws.
My intention was to modify the model trying to use only printed pieces.
This was not possible but I came close to the goal.
I had to use a sheet of EVA thickness of 1.5mm glued in the Base for not to damage the instrument.
| Bow_Colim-Base-Large.stl | 90.7KB | |
| Bow_Colim-Base-Short.stl | 14.9KB | |
| Bow_Colim-Edge_Vla.stl | 268.5KB | |
| Bow_Colim-Edge_Vn.stl | 45.6KB | |
| Bow_Colim-Lock1.stl | 172.7KB | |
| Bow_Colim-Lock2.stl | 174.0KB | |
| Bow_Colim-Lock3.stl | 172.3KB |
