Bouldering Holds 3D Printer Model
The file 'Bouldering Holds 3D Printer Model' is (stl) file type, size is 13.1MB.
The file 'Bouldering Holds 3D Printer Model' is (stl) file type, size is 13.1MB.
Some rock climbing holds I designed for my climbing wall. I designed them to be fastened to the wall with a 3/8 lag bolt but it should work with the standard allen bolt also.
I printed these with a .8mm nozzle at a .3mm layer height.
The holds can be scaled in the z direction to make them easier to hold onto
| grip_4.stl | 1.3MB | |
| rock_hold_10_hex_crimp.stl | 203.8KB | |
| rock_hold_11_foothold.stl | 142.5KB | |
| rock_hold_12_ribbed_sloper.stl | 12.0MB | |
| rock_hold_13_handle_jug.stl | 1.7MB | |
| rock_hold_14_slice.stl | 233.6KB | |
| rock_hold_15_hook.stl | 510.3KB | |
| rock_hold_16_tiny.stl | 194.6KB | |
| rock_hold_3_.stl | 391.5KB | |
| rock_hold_4_open.stl | 1.3MB | |
| rock_hold_5_pinch.stl | 2.5MB | |
| rock_hold_6_sloper.stl | 7.5MB | |
| rock_hold_7_crimp.stl | 122.4KB | |
| rock_hold_8_pocket.stl | 1.3MB | |
| rock_hold_9_ball_crimp.stl | 598.2KB |
