A bottle rack sized to fit 1L spirit bottles, so reduce in size for wine.
Prints with no supports, best to print joining pieces with long edge on the base for additional strength.
If you perfer the nut and thread (and screw heads) on each end then print 2 fronts instead of a back.
Used Exoxy to bond together and very solid, I used PETG and 5 walls, 50% infill.
If you are going for the same look, I sprayed in black, then a light dusting of copper spray before laquer.
| back_optional.stl | 234.7KB | |
| Front_or_both.stl | 352.2KB | |
| wine_rack_stud.stl | 1.1KB |
