I combined the opener part of the "Josef Prusa Beer Opener" and the lid part of dede67's "Beer Bottle Lid" into a cool new bottle opener that can be used to open and close bottles with crown caps again to protect it from stuff like dirt, wasps or flys falling in.
Just to mix it up a little I designed a few versions with toasts in different languages and one with a beer glass logo remixed from p5yho's "Beer keychain". Of course I added the blank version for remixing with your own styles as well.
I printed with 0.2 mm layer height and changed the color after the first two layers / 0.4 mm.
After printing just push a coin into the slot. If the coin doesn't fit heat it up with a lighter and melt it into the slot. If the coin is to loose just use a little super glue or a larger coin.
With the given print settings one bottle opener prints in just 43 minutes.
If printed a few of them in multiple colors it can be used at parties for keeping apart the guests bottles on a table.
I remixed the designs using Tinkercad, sliced the models in PrusaSlicer 2.3.3 and printed them in Prusament PLA Galaxy Black and Vanilla White.
| bottleopenercloser_blank.stl | 152.1KB | |
| bottleopener_beerglass.stl | 334.5KB | |
| bottleopener_cheers.stl | 395.1KB | |
| bottleopener_cincin.stl | 345.0KB | |
| bottleopener_lechaim.stl | 161.3KB | |
| bottleopener_nazdravi.stl | 396.0KB | |
| bottleopener_prost.stl | 363.4KB | |
| bottleopener_salud.stl | 366.2KB | |
| bottleopener_sante.stl | 338.3KB | |
| bottleopener_serefe.stl | 369.4KB | |
| bottleopener_skal.stl | 364.1KB |
