Bottle Opener And Cap GUN! 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl
Download type: zip
Size:1.0MB

The file 'Bottle Opener And Cap GUN! 3D Printer Model' is (stl) file type, size is 1.0MB.

Summary

Now This is FUN!

Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the fun of it.

https://youtu.be/32VpDq0FvxE

And very easy to make!

(Scroll down this page for the assembly instruction!)

Just a set of M3 bolts, an elastic rubber band and you'r all set. Oh I forgot, a 10 cent euro coin or, 1 dollar cent, or equivalent. A 12x2mm neodymium magnet to hold the cap in the barrel upon lancing completes it. Available for a few cents on AliExpress or similar.

This is a strong and wel build design. It's also safe as a bottle cap is a very big object and the speed it's fired is gentle. This is all ment for fun so it's designed to not look as a real weapon as much as possible.

The print does need some support but only for the two body halfs. No further cleanup.

Have Fun and please give me likes please and of course share your make!

The barrol is compatible with most caps out there. According the international standard for caps, DIN-norm 6099. Cap size 32.10... should be the biggest.

UPDATE 24-10-2019: Made the trigger spring end a bit longer for more spring action.

UPDATE 15-12-2019: Enhanced clearances (0.5) for the trigger axle and pusher components for both models after feedback from the community. Advice to tune your slicer. +/- 0.2 should be your maximum tolerance.

UPDATE 28-12-201: STEEL AXLE Some of you complained about breaking the plastic axle. I changed the position of one of the construction bolds so it is an axle to. As for me not the most elegant solution because if your 3D setup is tuned well it should work fine with the plastic. Both models are here to download.. Pick wise...

Witch pieces do you need to print per model:

Version with steel axle:

Beer_Cap_Gun_left_half_32mm_Steel_Axle_v1.stl
Beer_Cap_Gun_Right_half_32mm_Steel_Axle_v1.stl
Beer_Cap_Gun_Pusher_Block_v8.stl
Beer_Cap_Gun_Pusher_v9.stl
Beer_Cap_Gun_Steel_Axle_Trigger_v1.stl
Beer Cap Gun Spanner v8.stl

Plastic version:

Beer Cap Gun left half 32mm v2.stl
Beer_Cap_Gun_right_half_32mm_v2.stl
Beer_Cap_Gun_Pusher_Block_v8.stl
Beer_Cap_Gun_Pusher_v9.stl
Beer_Cap_Gun_Trigger_v8.stl
Beer_Cap_Gun_Spanner_v8.stl

BOQ

One rubber elastic band (Post man type)
Bolds, Hex or Philips or what ever
2mm X 12mm neodymium magnet. Or smaler!
3 x M3 X 8
4 x M3 X 18
One coin: round 20mm and 2 mm thick. Such as a 10 euro cent or a 1 dollar cent.

Beer_Cap_Gun_left_half_32mm_Steel_Axle_v1.stl 460.5KB
Beer_Cap_Gun_left_half_32mm_v2.stl 462.8KB
Beer_Cap_Gun_left_half_v9.stl 429.5KB
Beer_Cap_Gun_Pusher_Block_v8.stl 30.2KB
Beer_Cap_Gun_Pusher_v9.stl 94.0KB
Beer_Cap_Gun_Right_half_32mm_Steel_Axle_v1.stl 440.0KB
Beer_Cap_Gun_right_half_32mm_v2.stl 435.3KB
Beer_Cap_Gun_Right_half_v8.stl 408.6KB
Beer_Cap_Gun_Spanner_v8.stl 224.8KB
Beer_Cap_Gun_Steel_Axle_Trigger_v1.stl 45.0KB
Beer_Cap_Gun_Trigger_v8.stl 46.4KB