Bosch GTS 635-216 Fence V-groove Stone 3D Printer Model
The file 'Bosch GTS 635-216 Fence V-groove Stone 3D Printer Model' is (stl) file type, size is 49.2KB.
The file 'Bosch GTS 635-216 Fence V-groove Stone 3D Printer Model' is (stl) file type, size is 49.2KB.
The original clamping stone on the Bosch GTS 635-216 linear fence does not engage the V-groove of the aluminum profile. Properly engaging inside the v-groove increases stability and accuracy of the linear fence.
3 types of groove stones are available:
Nut embedded in the center of the part. (Demands pause print at 60% progress, insert M4 nut, continue print)
Nut to press in (circular cut-out)
It is usefull to replace the original 2x M4x6mm by 2x M4x10mm screws.
Btw. in case you need a print, just drop me a private message! Always happy to help out!
An if you like my stuff and think a tip would be suitable: https://www.paypal.me/tipFeal
| V-groove_stone_nut_embedded.stl | 86.4KB | |
| V-groove_stone_nut_glued.stl | 54.0KB | |
| V-groove_stone_nut_pressed_in.stl | 94.2KB |
