Just wall mountings for the GAL 18V-40, the AL 1860 and the GAL 1880. The GAL 18V-40 can also be mounted with the holes on the back of the charger but it fell of frequently so i made one for it too. The advantage of this mounts is that you can take the charger away whenever you need it somewhere else.
The mounting for the GAL 1880 is not as good as the others. it was the first one i made, because of that it's two parted. That makes it hard to assemble, also it was not that stable so the "arms" broke when we first put in the charger. Some small screws fixed that so I haven't had to reprint it. I applied some changes to my first design to make the weak parts stronger. I haven't tested those changes because i do not need another mount at the moment, but the changes should work well because the mounts for GAL 18V-40 and AL 1860 have the same improvements for the "arms" and there was no problem.
I would recommend printing it from PETG because PETG is a little more flexible what should improve the durability of the "arms".
| Halter_AL_1860.stl | 563.5KB | |
| Halter_Bosch_GAL_1880_Teil_1.stl | 334.1KB | |
| Halter_Bosch_GAL_1880_Teil_2.stl | 243.4KB | |
| Halter_GAL_1840.stl | 517.6KB |
