Bosch Food Processor MultiTalent 3 MCM3100WGB Tool Holder Removal Wedge 3D Printer Model
The file 'Bosch Food Processor MultiTalent 3 MCM3100WGB Tool Holder Removal Wedge 3D Printer Model' is (stl) file type, size is 22.4KB.
The file 'Bosch Food Processor MultiTalent 3 MCM3100WGB Tool Holder Removal Wedge 3D Printer Model' is (stl) file type, size is 22.4KB.
The Bosch Multitalent 3 food processor has a 'spindle' which goes inside the bowl, Bosch call it the tool holder as the blades fit onto it. Our tool holder gets jammed onto the bowl and is impossible to remove by pulling. This 3D print is a wedge that can be driven between the bowl and the spindle to force it off. It works well in my hands. I think Bosch solved this problem on later models by changing the spindle design. Personally I think they should have recalled the old designs as most people will probably suffer the same issue with old food building-up in the gaps. When you use the tool, the curved profile faces down into the bowl (as shown in the STL) and the flat side of the print faces up.
When you print the part, turn it so the flat side is down on the plate....
The tool works by leveraging against the curved surface of the bowl just below the spindle to generate lift. You may hear a satisfying 'pop' as the spindle is released!
| food_processor_tool.stl | 84.9KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
