Book Hide (small) 3D Printer Model Free Download

Description Files (9)

Summary

A book-like container for all your things in need of a place to hide!

Create your own cover, either in the Customizer/editing the .scad file or just drawing a 54x70x1mm square, with 45 chamfered edge on the bottom and add your own mix in to it. All remixes/makes are welcomed!

Check out the large version here: https://www.thingiverse.com/thing:3593742

The book is assembled as follows:

Separate the two sides of the Cover after printing.
Remove the built in supports under the hinge and the lock pin.
Clean all finish all parts.
Do a test fit, make sure the Upper and Lower Pins go in all the way without resistance and spin freely, and the pages fit nicely.
Insert the pins and glue the Pages to the back cover (this goes over the pins ends, locking them in place).
Hide your things.

Check out my other designs here: https://www.thingiverse.com/Superbeasti/designs

Book_Hide_Small.scad	1.6KB
Book_Hide_Small.stl	393.7KB
Fifty_Shades_of_PLA.stl	1.1MB
Harry_Printer_and_the_Goblet_of_ABS.stl	2.0MB
Lord_of_the_PETGs.stl	989.1KB
Lower_Bolt.stl	93.0KB
Pages_Small.stl	106.2KB
Tales_of_Princess_Saima.stl	956.8KB
Upper_Bolt.stl	93.0KB

Book Hide (small) 3D Printer Model

Summary

Tags

You might also like