Book Hide (Large) 3D Printer Model Free Download

Description Files (7)

Summary

A book-like container for all your things in need of a place to hide!

Create your own cover, either in the Customizer/editing the .scad file or just drawing a 110x150x1mm square, with 45 chamfered edge on the bottom and add your own mix in to it. All remixes/makes are welcomed!

The book is assembled as follows:

Separate the two sides of the Cover.
Remove the built in supports under the hinge and the lock pin.
Clean all finish all parts.
Do a test fit, make sure the Upper and Lower Pins go in all the way without resistance and spin freely, and the pages fit nicely.
Insert the pins and glue the Pages to the back cover (this goes over the pins ends, locking them in place).
Hide your things.

This is quite a challenging print, so I suggest your try printing the smaller version first! https://www.thingiverse.com/thing:3547820

Check out my other designs here: https://www.thingiverse.com/Superbeasti/designs

Book_Hide_Cover_Large.stl	1.3MB
Book_Hide_Large.scad	1.6KB
Book_Hide_of_Wisdom.stl	2.3MB
Game_of_Printers.stl	997.4KB
Lower_Bolt.stl	91.8KB
Pages_Large.stl	154.1KB
Upper_Bolt.stl	91.8KB

Book Hide (Large) 3D Printer Model

Summary

Tags

You might also like