This is a simple mount for most of IWA's training aids. Designed for the M11, M12 and/or M13 it should also work for the smoke devices such as the M14. Most likely the M15 with some scaling**
It has 4 holes for screw mounting to a tree, panel, board or whatever. It also has 2 slots to use wire, ties or zip ties for a more expedient placement.
Once placed, a trip line can be tied to the pull pin and ran across the desired path. Ensure the opposite end of the line is securely fastened. Or in terms like an ambush, the line could be pulled manually by hand.
**- for smoke, I suspect that the heat may warp or totally melt the print.
USE AT YOUR OWN RISK.
Updated Photos- Showing the mounting possbilties. You can use screws, zip ties or any other means to fashion it in place. When placing your line, I'd recommend hooking it around the main pin itself and not the pull-ring as this will eliminate extra play. You will also need to disengage the twist/hook safety.
Due to the M11-13's blowing out from the bottom, I cannot yet speak to the longevity of these holders.
AGAIN, USE AT YOUR OWN RISK IAW LOCAL LAWS
| Booby_trap_Sim.stl | 95.4KB |
