Bonita Floater 3D Printer Model
The file 'Bonita Floater 3D Printer Model' is (stl) file type, size is 116.1KB.
The file 'Bonita Floater 3D Printer Model' is (stl) file type, size is 116.1KB.
I made this floater to catch Bonitas at the Belmont Pier in Long Beach. When your print is about 50% done, pause it and place a minimum of 2 ball bearings on each slot(there are 6 chambers which you need a total of 12 bearings. I use 5mm in diameter but it's totally up to you what bearing you prefer. Please keep these settings on your printer for best result:
Infill: 100%
Quality: Any setting is fine
Support: Tree and Build Touch Plate(so support only shows outside not on the model 6 chambers)
Please note: it is important that the inside has no support in order for the bearing to roam freely and make a rattle sound when you cast/reel it.
Enjoy ;)
| Bonita_Grenade.stl | 324.7KB |
