Bone Shapped Dog Poop Bag Holder 3D Printer Model
The file 'Bone Shapped Dog Poop Bag Holder 3D Printer Model' is (stl) file type, size is 3.1MB.
The file 'Bone Shapped Dog Poop Bag Holder 3D Printer Model' is (stl) file type, size is 3.1MB.
I lose my old dog poop bag holder. so i decided to make a new one and 3D print it!
This does NOT need ANY supports. i have printed it multiple times with no failures.
I printed it with variable layer height enabled. put in a layer height of 0.225mm, and then have the variable height set to 0.075mm. that will set the minimum layer height to 0.15mm, and the maximum layer height to 0.3mm. i also set the top and bottom layers number to both 4, and number of wall lines to 3. In all it took about 8 hours to print everything.
if you do not want to do variable height, a good layer height is 0.2mm
I designed it just like the old one, in the shape of a dog bone.
there is a top half and bottom half that you can put the dog poop bags into, and then they clip together.
There are also two other files. the Link file is to be glued into the back side of the top half. there are holes made to fit it.
there is also a Clip file. that is to be printed to connect the dog poop bag holder to your leash. if it needs to be wider, you can always stretch the side in Cura.
| DoggyBag_Bottom_STL.stl | 3.7MB | |
| DoggyBag_Clip_STL.stl | 1.4MB | |
| DoggyBag_Link_STL.stl | 2.3MB | |
| DoggyBag_Top_STL.stl | 2.8MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
