This is a modification on the Fidget Spinner. It requires only one (1) bearing and uses hex nuts to provide weight for the ends. It is shorter than my previous design and requires less clearance. It may be customized by adding your choice of Comic Themed Logos at either end. I am still perfecting the mating of the bone and caps. the thicker opening nubone is very tight and requires A LOT of force to mate the caps. The revised nubone fits more easily but will require the caps to be glued in place
| aquaman_cap.stl | 484.4KB | |
| atom.stl | 373.4KB | |
| avengers_cap.stl | 252.9KB | |
| batgirl.stl | 352.9KB | |
| batman_cap.stl | 362.1KB | |
| bedtimebear.stl | 358.8KB | |
| Black_Widow.stl | 343.4KB | |
| CA_cap.stl | 397.7KB | |
| dccomics.stl | 346.3KB | |
| dd1.stl | 352.2KB | |
| deadpool.stl | 345.2KB | |
| dr_who1.stl | 347.2KB | |
| FF_cap.stl | 465.9KB | |
| flash.stl | 355.3KB | |
| goodluckbear.stl | 361.5KB | |
| GreatestAmericaHero_cap.stl | 358.3KB | |
| green_arrow1.stl | 354.8KB | |
| green_lantern.stl | 225.4KB | |
| hawkeye.stl | 169.3KB | |
| hawkman_cap.stl | 339.5KB | |
| hulk.stl | 377.2KB | |
| ironma.stl | 350.7KB | |
| ironman_face.stl | 351.7KB | |
| iron_fis_cap.stl | 346.8KB | |
| legion1.stl | 346.9KB | |
| makeawishbear.stl | 350.2KB | |
| nubone_-_thicker_opening.stl | 1.3MB | |
| Phoenix.stl | 352.3KB | |
| revised_bone.stl | 1015.0KB | |
| robin.stl | 341.9KB | |
| robin1.stl | 341.9KB | |
| shield.stl | 349.6KB | |
| spider.stl | 365.7KB | |
| spider_cap.stl | 308.4KB | |
| star_wars.stl | 352.5KB | |
| strange_cap.stl | 350.1KB | |
| superman_cap.stl | 325.1KB | |
| tenderheart_bear.stl | 347.2KB | |
| thing.stl | 421.3KB | |
| thor_cap.stl | 407.8KB | |
| thundercats.stl | 355.6KB | |
| watchman1.stl | 347.2KB | |
| wolverine.stl | 371.1KB | |
| wonder_woman_cap.stl | 594.8KB | |
| xmen.stl | 484.7KB |
