Bolt Action Blowgun 3D Printer Model
The file 'Bolt Action Blowgun 3D Printer Model' is (stl) file type, size is 5.6MB.
The file 'Bolt Action Blowgun 3D Printer Model' is (stl) file type, size is 5.6MB.
This is the Bolt Action Blowgun, a 3D printed gun that lets you shoot multiple rounds with a magazine capacity of 4 rounds!
The only things you need are a PVC pipe with 20mm outer diameter and 17mm inner diameter, which will be the barrel, bolt and stock, a tiny piece of 1mm metal wire, a little pen spring, and a rubber band!
The rest of the gun is completely 3D printable!
The bolt has a guided travel, and it locks like a real gun, so rotating it is not only cool, it seals better the gun!
Also, if the rubber band you mount in the magazine is of the right size, the bolt will lock open with an empty mag
The design is easily customizable, so you can design flash hiders, sights, grips, different magazines and so on!
---Gun Test---
https://www.youtube.com/watch?v=mZOLv2WZP-0&list=UUWTzCtNMrdBBOWKIJSTQsig
---Bolt assembly---
https://www.youtube.com/watch?v=CK8Wp7uklts&index=2&list=UUWTzCtNMrdBBOWKIJSTQsig
UPDATE! 28/11/18
Now with a muzzle brake! Actually removes the "pop" sound the gun made when shot, and also adds some aesthetics!
UPDATE 16/09/19
Single Shot Conversion, adds a piece that can substitute the magazine to turn the gun in a single shot rifle!
Also, i'm working on a drum magazine, i'll eventually add it further on
UPDATE 18/09/19
Added a front handguard, to add aesthetics and comfort.
| Bolthead.stl | 71.4KB | |
| Bolt_handle.stl | 819.7KB | |
| Bolt_pin.stl | 570.4KB | |
| Diablo.stl | 216.7KB | |
| Follower.stl | 268.4KB | |
| Front_Grip.stl | 2.7MB | |
| Grip.stl | 2.1MB | |
| Grip_Pin.stl | 83.9KB | |
| Gun.stl | 872.4KB | |
| Mag.stl | 390.3KB | |
| Mag_2.stl | 22.7KB | |
| Mag_bottom.stl | 116.7KB | |
| Mag_relase.stl | 352.4KB | |
| Mouthpiece.stl | 1.0MB | |
| Muzzle_Brake.stl | 2.3MB | |
| Single_Shot_Conversion.stl | 138.8KB | |
| Slug.stl | 2.6MB | |
| Stock.stl | 1.3MB |
