Boeing 777-9x (ver.0.31)
2023-02-08 UPD: Add Livery Aeroflot, Turkish Airlines (.pdf, .cdr files)
A 1/100 Boeing 777-9x aircraft model prepared for printing on an FDM printer.
Printing is possible both on a reduced scale of 1/200 and in an enlarged 1/72.
Cavities of windows, cockpit glazing, headlights and lights pour transparent epoxy.
Optionally, electrification can be made (main channels for laying wires, as well as an electronics compartment are available).
STL files in archive here: https://drive.google.com/file/d/1pryxA3zx2t38Gqoxmu6PG_kCohSsBRMs/view?usp=sharing
Schematic here: https://drive.google.com/file/d/1iKTVXsm6e-XWFRqnVn3RUPbUak5zw_6y/view?usp=sharing
Sketch here: https://drive.google.com/file/d/1ICcawORgYM0_ttVJFgqt6gdK6dNviUCN/view?usp=sharing
Assembly instructions in Russian: https://3dtoday.ru/blogs/lukys30/boeing-787-bolsaya-model-avialainera-dlya-pecati-na-3d-printere
Liveries will be added later (Aeroflot, Turkish Airlines)
| BANO_Boeing_777-9X__ver_04.ino | 16.4KB | |
| Elevator.STL | 3.9MB | |
| forward_wheel.STL | 3.8MB | |
| Front_landing_gear_1.STL | 1.1MB | |
| Front_landing_gear_2.STL | 877.9KB | |
| front_wheel_cover_left.STL | 199.7KB | |
| Fuselage_antenna.STL | 1.4KB | |
| Fuselage_cap.STL | 1.3MB | |
| Fuselage_Cap_scale_1_120.STL | 1.3MB | |
| Fuselage_Pusher.STL | 610.8KB | |
| Fuselage_sattelite_antenna.STL | 447.5KB | |
| Fuselage_Section1-nose.STL | 5.5MB | |
| Fuselage_Section2.STL | 4.5MB | |
| Fuselage_Section3.STL | 3.1MB | |
| Fuselage_Section4.STL | 4.2MB | |
| Fuselage_Section5.STL | 4.0MB | |
| Fuselage_Section6.STL | 3.9MB | |
| Fuselage_Section7.STL | 3.2MB | |
| Fuselage_Section8.STL | 5.8MB | |
| Fuselage_Section9-Tail.STL | 7.0MB | |
| Keel.STL | 3.0MB | |
| Livery_Boeing_777-9x_Aeroflot.cdr | 2.7MB | |
| Livery_Boeing_777-9x_Aeroflot.pdf | 1.6MB | |
| Livery_Boeing_777-9x_Turkish_Airlines.cdr | 3.9MB | |
| Livery_Boeing_777-9x_Turkish_Airlines.pdf | 1.4MB | |
| Livery_Boeing_777-9x_Turkish_Airlines_A5.pdf | 1.4MB | |
| Main_landing_gear.STL | 3.8MB | |
| main_wheel.STL | 3.8MB | |
| main_wheel_cover_left_cut.STL | 99.6KB | |
| mechanization_1.STL | 950.4KB | |
| mechanization_2.STL | 972.1KB | |
| mechanization_3.STL | 1.0MB | |
| mechanization_4.STL | 1.2MB | |
| mechanization_5.STL | 1.1MB | |
| Turbine.STL | 8.8MB | |
| Turbine_fan.STL | 4.4MB | |
| Turbine_inside.STL | 1.3MB | |
| Turbine_shark.STL | 33.4KB | |
| wing_1.STL | 2.8MB | |
| wing_2.STL | 2.6MB | |
| wing_3.STL | 2.1MB | |
| wing_4.STL | 1.6MB |
