Boeing 737 Efis For DIY Simulator 3D Printer Model Free Download

Description Files (9)

Summary

Last updates: 6/30/2015

This thing contains Captain/FO Efis (Electronic flight instrument system) panel and very experimental MCP (Mode Control Panel) for DIY simulator making.

EFIS:

EFIS panel (both captain and F/O are same)
Parts: push button knobs and holder for push buttons (take a look at the pictures)
Fitting push buttons = 6x6x5mm
Recommended IO device is BBI-32 or BU0836x from Leo Bodnar
Use hot glue to connect push buttons to holder and holder to the panel.
Recommended knobs for this EFIS http://www.thingiverse.com/thing:851918

MCP was never completed so I don't recommend to build one. There's no buttons for it.

MCP:

W_MCP parts are meant to be printed with White filament
G_MCP parts are meant to be printed with Gray filament
Use glue or any other method to connect MCP parts together
I have not tested or build MCP because I bought MCP from OpenCockpits for my sim (only part I bought ready made)

Following website is dedicated to this project: http://martin737.nitramite.com/

EFIS_PANEL.stl	630.4KB
EFIS_PARTS.stl	68.0KB
EFIS_PARTS_WITHBRIM.stl	71.3KB
G_MCP1.stl	990.0KB
G_MCP2.stl	360.6KB
G_MCP3.stl	250.3KB
W_MCP1.stl	438.9KB
W_MCP2.stl	217.9KB
W_MCP3.stl	189.1KB

Boeing 737 Efis For DIY Simulator 3D Printer Model

Summary

Tags

You might also like