Boba Fett Helmet – Easy Assembly 3D Printer Model
The file 'Boba Fett Helmet – Easy Assembly 3D Printer Model' is (stl) file type, size is 894.1KB.
The file 'Boba Fett Helmet – Easy Assembly 3D Printer Model' is (stl) file type, size is 894.1KB.
I tried printing the original version of this helmet, but the jigsaw puzzle assembly was cut strangely with open surfaces. This was too difficult to print and was a nightmare during assembly. The pieces didn't fit well so I did a remix of the full helmet.
I took the full build and sliced it into rings. These printed better without lifting and assembled easier. Also added 2 missing pins for the antenna hinge from the original make. I printed the model at 95% of the original scaling for better fitment. (I wear a size large motorcycle helmet).
Recommended print scaling of STL files:
-Main Helmet p1-5: 9.5%
-Pins (hinge and limiter): 100%
-All other accessories: 95%
You may want to scale differently, but recommend staying 10:1 accessories to main helmet .
| AntennaAssembly_1_Cut_1.stl | 3.7KB | |
| AntennaAssembly_1_Cut_2.stl | 30.1KB | |
| AntennaAssembly_2.stl | 58.8KB | |
| AntennaStick.stl | 48.2KB | |
| Boba_Fett_Helmet_p1.stl | 186.5KB | |
| Boba_Fett_Helmet_p2.stl | 312.9KB | |
| Boba_Fett_Helmet_p3.stl | 391.1KB | |
| Boba_Fett_Helmet_p4.stl | 311.4KB | |
| Boba_Fett_Helmet_p5.stl | 309.0KB | |
| LeftSide.stl | 27.7KB | |
| MouthVent.stl | 71.2KB | |
| Pin_Fett_antenna_hinge_v1.stl | 44.7KB | |
| Pin_Fett_antenna_limiter_v1.stl | 36.5KB | |
| RightSide.stl | 32.9KB | |
| ViewFinderSurroundA.stl | 22.5KB | |
| ViewFinderSurroundB.stl | 181.0KB | |
| ViewFinder_lense.stl | 9.9KB | |
| ViewFinder_lenseSurround.stl | 88.7KB |
