Desigernd for the RC Impluse 32" boat. ALso all parts are made to fit the buildplate of the Creality ender pro. double check and make sure they will fit for your build plate.
Trailer should be assembled using 10-32 x 3/4" button head bolts.
| 12mm_Hex_Wheel_Nut.stl | 1.2MB | |
| 20T_Free_Gear.stl | 131.3KB | |
| 20T_Free_Gear_half_arc_drive.stl | 120.2KB | |
| 40T_winch_gear.stl | 223.5KB | |
| 7T_Winch_gear.stl | 45.6KB | |
| 7T_Winch_gear_half_arc.stl | 59.5KB | |
| 8mm_Bearing_hub_locker.stl | 3.3MB | |
| 8mm_Bearing_inner_hub.stl | 57.5KB | |
| Axile_mount.stl | 239.9KB | |
| Bow_Trust.stl | 1.9MB | |
| center_lift.stl | 2.3MB | |
| Dual_Mount_Axle.stl | 28.2KB | |
| duel_wheel_pivot.stl | 18.5MB | |
| frame.stl | 819.6KB | |
| Free_Gear_hub.stl | 29.1KB | |
| Hub_Mount.stl | 3.7MB | |
| Roller.stl | 3.2MB | |
| Roller_Axle.stl | 28.2KB | |
| Roller_Dual_mount.stl | 133.5KB | |
| single_trust_mid.stl | 199.6KB | |
| torsion_bar.stl | 3.3MB | |
| tounge_1.stl | 148.8KB | |
| tounge_2.stl | 434.1KB | |
| tounge_3.stl | 596.2KB | |
| Winch_bolt_mount.stl | 177.1KB | |
| Winch_Drum.stl | 188.0KB | |
| Winch_Frame.stl | 8.8MB |
