Boat Dock System For 28mm Miniatures Gaming 3D Printer Model
The file 'Boat Dock System For 28mm Miniatures Gaming 3D Printer Model' is (stl) file type, size is 2.6MB.
The file 'Boat Dock System For 28mm Miniatures Gaming 3D Printer Model' is (stl) file type, size is 2.6MB.
For those of you who like water in your game scenarios, here's a dock set for you which allows you to build any size dock you need. 3" and 5" straight pieces are provided along with a 2" ramp (or spacer) along with left and right hand corners.
Sorry, I do not have brown filament at the moment, otherwise I would printed these in brown. I'll have to paint these a bit to have them ready for my game board.
There are 8 STL files included in this set. The small dock support file will probably be used the most, it is the support that snaps into place for the straight pieces. I still recommend you glue the supports on even though they snap together quite nicely. The corner's and their supports need to be glued.
Enjoy!
NOTE: The miniatures shown in the pictures are to help show scale of the item. They are not included in the download files.
NOTE II: The boats in the picture will be published later. I need to review my files before publishing.
| Small_Dock_3_.stl | 518.2KB | |
| Small_Dock_5_.stl | 866.2KB | |
| Small_Dock_corner_left-hand.stl | 327.4KB | |
| Small_Dock_corner_right-hand.stl | 327.4KB | |
| Small_Dock_corner_support_left-hand-m.stl | 1.2MB | |
| Small_Dock_corner_support_right-hand-m.stl | 1.2MB | |
| Small_Dock_ramp.stl | 372.2KB | |
| Small_Dock_support-m.stl | 978.1KB |
