Cap for BNC connector.
If you want to thank me, https://ko-fi.com/maxpi
You can find the SDG2000X face lid here https://www.thingiverse.com/thing:6610946
PET-G
walls = 3 (0.4-0.5mm)
layers height = 0.2-0.25 (0.2 - pref) (optionally cura fuzzy skin outside only)
| BNC_cap_v3.STL | 634.8KB | |
| BNC_cap_v3_long.STL | 672.2KB |
