BMW R 1200 GS, K50: Non-destructive Screw Connection For Luggage Rack 3D Printer Model
The file 'BMW R 1200 GS, K50: Non-destructive Screw Connection For Luggage Rack 3D Printer Model' is (stl) file type, size is 339.1KB.
The file 'BMW R 1200 GS, K50: Non-destructive Screw Connection For Luggage Rack 3D Printer Model' is (stl) file type, size is 339.1KB.
With these three blocks, you can screw a top case, tool bag etc. onto the luggage rack of the 1200 GS (K50) without having to change anything on the motorcycle. The blocks have a 4 mm hole in the middle. I printed them from TPU (Flex 98A) with 100 percent infill and they are of course indestructible because the layer adhesion of TPU is enormous. PLA or PETG could also work, but I recommend TPU with 100% infill, especially for heavy cases. I also include 5, 10, 15 and 20 mm spacer sleeves, a drilling template and caps for the ends of the screws. Have fun and keep riding!
| block_center.stl | 160.6KB | |
| block_left.stl | 52.9KB | |
| block_right.stl | 52.9KB | |
| cap_5_mm.stl | 732.5KB | |
| drilling_template.stl | 22.9KB | |
| spacer_sleeve_10_mm.stl | 146.5KB | |
| spacer_sleeve_15_mm.stl | 153.3KB | |
| spacer_sleeve_20_mm.stl | 159.0KB | |
| spacer_sleeve_5_mm.stl | 104.3KB |
