This wireless charger mount is designed to fit in the center console of an E46 BMW with the roll-top storage compartment. My roll-top was badly damaged, so I removed it and replaced it with this. The charger hole is sized for this MagSafe puck from Amazon. The charger should be a friction fit, but if you want a touch of extra security, a couple drops of CA glue should do the trick.
"I fed the power to the charger using an add-a-fuse on the reverse lights 10A fuse and then added a ground to the body. The wires then go into a hidden 12V USB charger under the center console to provide power out of view. Other fuses would work for the add-a-fuse, just make sure you use the top row, so power to the charger is disconnected when the car is turned off.
This was designed to work with an iPhone 14 and a 14 Pro, but other phones should work well too. I have included a STEP file, should you want to modify it to meet your needs.
I printed it in matte black PLA with Cura's automatic supports. 20% infill is fine, but I would recommend bumping that up a bit where the charger socket meets the base, just for a bit more strength on that joint."
| BMW_E46_Wireless_Charger_With_Logos.stl | 223.3KB |
