This is a BMO figure to hold your Nintendo Switch Docking Station. The standard docking station from Nintendo.
The files are broken up to be printed in several parts. I used mint green filament so that the main body doesn't need to be painted or touched up. Just print and glue the main body, legs and arms together.
The buttons are also printed separately and can be painted before installation. This is a lot easier than trying to paint the buttons while they are already on the main body.
The front of the body can be printed front down with no supports (support on bridges optional), or front up with supports (to support the face plate rim).
Two face plates are included and can be printed whole then painted, or face plate 1 can be printed in two parts and glued.
I used PETG with standard settings, 10% infill, 0.3 layer height, powder coated bed.
| BMO_arm.stl | 7.5MB | |
| BMO_Body_Back.stl | 164.2KB | |
| BMO_Body_Front.stl | 10.8MB | |
| BMO_Face_1.stl | 274.2KB | |
| BMO_Face_1a.stl | 685.6KB | |
| BMO_Face_1b.stl | 816.8KB | |
| BMO_Face_2.stl | 318.8KB | |
| BMO_Front_Buttons.stl | 13.6MB | |
| BMO_Leg_L.stl | 5.6MB | |
| BMO_Leg_R.stl | 5.6MB |
