Bluebird House 3D Printer Model
The file 'Bluebird House 3D Printer Model' is (stl) file type, size is 158.0KB.
The file 'Bluebird House 3D Printer Model' is (stl) file type, size is 158.0KB.
I use to make these out of wood and thought I would try to print one, the wooden version is bigger but hopefully this will be big enough for the birds. I made it where it can be printed on the ender 3/Pro or larger printers.
The front and bottom should slide in and out freely to allow cleaning when needed I will print a full size version once my Blue Filament arrives.
UPDATE::: On 2/13/19 I mounted the Bird House and on 2/21/19 we saw a pair of Bluebirds going in and out of the house.
Added a vented version 2/27/19
Added a picture 11/27/19 of the nest built in the box I put up.
I printed this using Cura without supports at .2 mm layer height. I used a 15mm Raft to print the Bottom so it could print standing up. The second grove from the bottom is for a piece of Wire Mesh, I bought wire Gutter guard from Lowes and it works great,(see photos) I've included a file as a size reference for the wire.
I will post Pics of the full size one once I get it printed.
If you try printing it please post a make.
| BlueBird_House_Bottom.stl | 53.6KB | |
| BlueBird_House_Front.stl | 92.1KB | |
| BlueBird_House_Rat_Wire_Sizing.stl | 50.1KB | |
| BlueBird_House_Vented_Ver1.stl | 303.4KB | |
| New_Pin_BlueBird_House_Ver3.stl | 26.9KB |
