Blue Yeti Screws And Washers 3D Printer Model
The file 'Blue Yeti Screws And Washers 3D Printer Model' is (stl,md) file type, size is 1.5MB.
The file 'Blue Yeti Screws And Washers 3D Printer Model' is (stl,md) file type, size is 1.5MB.
I purchased a blue yeti pro with stand used and it was lacking the screws and washers required for the mic to be mechanically retained in the stand.
I designed these parts in onshape from measurements of the mic and stand, and pictures of the missing parts.
You can print the test screw to get a feel for the texture on the outside of the screw cap, as well as to do a test fit with the mic and stand.
I assume the original washers don't have a fillet but I think I like the look better with one. I've included both parts.
I printed everything in the photos on a prusa i3 mk3 using Das Filament's "Anthrazit" PLA; I used a 20% infill for all parts and the final version was printed at 0.05mm layer height. All parts feel sturdy and I'm alble to tighten the screws to sufficiently arrest the mic without any stripping or damage to the threads.
Printer: https://shop.prusa3d.com/en/3d-printers/180-original-prusa-i3-mk3-kit.html
Filament: https://www.dasfilament.de/detail/index/sArticle/105/sCategory/33
| blue_yeti_screw.stl | 2.0MB | |
| blue_yeti_test_screw.stl | 1.8MB | |
| blue_yeti_washer_-_fillet.stl | 562.6KB | |
| blue_yeti_washer_-_no_fillet.stl | 56.3KB | |
| README.md | 1.4KB |
