So i had one of those
$10 ikea lamps laying around and i needed a way to have my microphone off my desk. You don't need any extra hardware as this was made to use all the original parts.
To assemble, talk off the lamp head by taking off the thumb screw and pull out the cable for the lamp. I had to cut the cord on the lamp so be careful with that. you might need to loosen up the other two screws on the triangle plates to get the lamp mount out and the mic mount in. keep the thumb screw and bolt for reuse. slot in the printed part and tighten the screws. you might also have to tighten up the rest of the screws on the arm to support the extra weight of the mic. For the mic i used the original stand and took off the folding legs. just unscrew the screw on the very bottom of stand and take out the legs and re assemble. then slide the stand though the big hole in the printed part and screw the mic on. It should be just a press fit.
| blue_snowball_and_ikea_mic_adaptor.STL |
