A jug/pinch for vertical to very angled walls

Vertical walls: Easy
Slightly Angled walls: Easy-moderate
Very Angled walls: Moderate

12/1/23 I just listed my pack of 12 climbing holds on cgtrader and Cults3D for a very reasonable price. I have created all of these holds myself and I think they are very unique and offer great versatility for your home climbing wall! Enjoy this free hold as a sample of my work 😃 I am SUPER happy with this hold and I've been using it a lot on my training wall!

Here is the link to the pack:

https://www.cgtrader.com/3d-print-models/hobby-diy/other/star-pack-climbing-holds
https://cults3d.com/en/3d-model/tool/star-pack-climbing-holds

Mounting information:

3/8-16 bolt hole with 3/8 washer (3/4 OD washer)
No. 10 screw for the screw hole

Print with Cura's fuzzy skin experimental setting for texture, fuzzy skin settings used:

Fuzzy skin thickness: 0.3 (mm)
Fuzzy skin density = 6.0 (1/mm)
Fuzzy skin Point Distance = 0.1667 (mm)

Infill should be at least 30%, with at least 6 walls, and DO NOT OVERTIGHTEN!
I only weigh about 145 pounds and I've never had a hold break on me but be responsible and don't skimp out on material and print with more infill/walls for a stronger hold

Enjoy and let me know if there are any particular holds you want designed for your home walls! Also leave a comment if you need a version with different mounting holes, I will quickly add another STL file with custom bolt holes and screw holes if you need it.