A customizable corner/tilt wedge angle mount for the Amazon Blink Doorbell.

STL files for various turn & tilt angles are attached, and others can be created by customizing the attached SCAD file.

Note that both turn & tilt can be enabled concurrently (in this case remember that the "mirror" function in Slic3r can be used to flip the turn and/or tilt angle, e.g. if doorbell is on the other side of your door).

Note that the wall attachment does not need to be the same size as the Blink Doorbell itself (e.g. width can be narrower for example when there's a high turn angle, or perhaps you'd like it wider for more stability).

If the optional security ridge is enabled, a ridge is generated around the doorbell, and a top cap is printed which should be screwed on (perhaps with a security torx screw) after clicking the doorbell in place. This results in more difficulty (more time) for a camera thief to detach (and for you to detach when the Blink doorbell intermittently locks up and you need to pull out the batteries to reset it). Note that the security ridge top cap must be placed on TOP; use the "mirror" feature to swap turn direction if necessary. Attached photos and a couple of the attached STL files have this feature enabled (feature is also enabled in the SCAD file).

NOTE: See "fancywork"s comments regarding the newer 3-hole Blink doorbell which uses a different backplate from the original one (my "security ridge" design apparently doesn't work with this version but I don't have one of this model to test.) Differences between the 2-hole & 3-hole versions are described in these videos: 2-hole version (that I designed this for): https://youtu.be/3xSHRiE_7-4?t=14 ; newer 3-hole version: https://youtu.be/NY4x1T2tJ1w?t=10

For anyone having difficulty customizing the SCAD file for a desired turn and tilt angle and protrusion from the house, please make a request in the comments (including whether to include the security ridges).

[Updated 2/22/23: Corrected camera cutout & screw position for 65-degree-turn & 70-degree-turn versions; added new SCAD file for these larger-turn-angle versions]